A5 PLA LED Hybrid Ant Setup with Plaster of Paris and Smart Bluetooth Meter and Small Outworld Complete Ant Setup

 

How to set it up properly?

Please kindly check the pictures.

 

A5 PLA LED Hybrid Ant Setup with Sand and Smart Bluetooth Meter Ant Farm Formicarium is formed by acrylic and PLA plastic with Plaster of Paris bedding. The humidity area is filled with natural Greek Sea sponge so humidity lasts longer.

The connection between the nest itself and the humidity area is secured with stainless steel mesh.

Exits are 12mm OD (10mm ID) and could be connected easily with any standard 12mm OD test tube.

It can be easily connected with a water station (also included) or any of our other products.

 
Please make sure you are keeping your ants to the correct humidity.

Please note that due to the natural materials used, imperfections, glue spots, and/or tiny dents on the arena's surface may be present. Please see the pictures carefully.

 

Valid for the raise of ants, with a queen.

Natural and Ecological, also fully recyclable  A5 LED Nest with Smart Meter with with Plaster of Paris bed and Small Outworld.

 

Lots of ant colonies (queen ant and 5-10 workers) available (please see options).

 

Option 1:

A5 PLA LED Nest Complete setup contains:

- 1 x A5 PLA LED Ant Nest with with Plaster bed and Smart Bluetooth Meter 210 x 146 x 46mm 
- 1x Ant Arena Outworld Formicarium Farm Small 98x78x95 mm
- 1 x Magnifying Glass
- 1 x Plastic pipette
- 1 x Connecting kit
- 1 x Water Station+Connector
- 1 x Artificial Plants
- 1 x Sand Bag-approx. 200gr.
- 1 x Honey food (organic)
- 1 x 12V LED transformer
- 1 x LED dimmable ON/OFF switch

 

 

Option 2:

A5 PLA LED Nest with Heating Cable Complete setup contains:

- 1 x A5 PLA LED Ant Nest with with Plaster bed and Smart Bluetooth Meter 210 x 146 x 46mm
- 1x Ant Arena Outworld Formicarium Farm Small 98x78x95 mm
- 1 x Magnifying Glass
- 1 x Plastic pipette
- 1 x Connecting kit
- 1 x Water Station+Connector
- 1 x Artificial Plants
- 1 x Sand Bag-approx. 200gr.
- 1 x Honey food (organic)
- 1 x 12V LED transformer
- 1 x 12V Heat Cable + transformer
- 1 x LED dimmable ON/OFF switch

 

Option 3:

A5 Complete Setup with LED Light, Thermostat and Built-in Heating Mat Complete setup contains:

- 1 x A5 PLA LED Ant Nest with with Plaster bed and Smart Bluetooth Meter 210 x 146 x 46mm
- 1x Ant Arena Outworld Formicarium Farm Small 98x78x95 mm
- 1 x Magnifying Glass
- 1 x Plastic pipette
- 1 x Connecting kit
- 1 x Water Station+Connector
- 1 x Artificial Plants
- 1 x Sand Bag-approx. 200gr.
- 1 x Honey food (organic)
- 1 x 12V LED transformer
- 1 x 5V Built-in Heating Mat (50x50mm)
- 1 x Digital Thermostat Switch
- 1 x LED dimmable ON/OFF switch

 

 

Option 4:

A5 Complete Setup with LED Light, Digital Thermostat and Heating Cable Complete setup contains:

- 1 x A5 PLA LED Ant Nest with with Plaster bed and Smart Bluetooth Meter 210 x 146 x 46mm
- 1x Ant Arena Outworld Formicarium Farm Small 98x78x95 mm
- 1 x Magnifying Glass
- 1 x Plastic pipette
- 1 x Connecting kit
- 1 x Water Station+Connector
- 1 x Artificial Plants
- 1 x Sand Bag-approx. 200gr.
- 1 x Honey food (organic)
- 1 x 12V LED transformer
- 1 x 12V Heat Cable + Transformer
- 1 x Microcomputer Thermostat
- 1 x LED dimmable ON/OFF switch

 

Please NOTE THAT Option 3: A5 Complete Setup with LED Light, Thermostat and Built-in Heating Mat provides the following temperatures inside the nest:

- Low indicator light:          1.2 to 2.2 degrees Celsius higher than the ambient temperature

- Middle indicator light:      2.5 to 3.5 degrees Celsius higher than the ambient temperature

- High indicator light:         5.2 to 6.2 degrees Celsius higher than the ambient temperature

 

 

Please NOTE THAT all the nests are made to order also are hand made so different plastering could be spotted and the nest you'll get will be similar but not identical to the one shown in the pictures.

 

 

Good to know:
Before you connect the ant's test tube you should water the nest with mineral (bottled) water only
(the watering hole is where the yellow Greek sponge is).
Tap water may cause fungus to appear. Fungus is deadly to most ant species.
Fill the water test tube with mineral water, then put the cotton on so it’s well sucked with water and connect it to the outworld.
Connect the nest to the outworld. Leave the whole setup like so for a day at least (2-3 days is recommended).
Then remove the cotton ball out of the queen's test tube and connect it to the nest carefully using the queen connection kit provided.
Wrap the ant’s test tube with tinfoil and leave it there for the first 10-14 days and after that start to slide it out just 1-2mm every day.  
Please be patient, your ants won’t move into the nest if they are not ready.
Your ant setup must be kept in no vibrations place (away from daily household activity) at room temperature.
The red acrylic filter must stay on top of the nest all the time,
you can remove it once a week for 2-3 minutes to have a better look at your colony.
The same rule applies to the black acrylic cover. Placed on top all the time.
You can remove it for 5-10 minutes daily and enjoy your queen ant with the red filter on.


Colonies failed due to lack of fresh water supply, lack of food, and mostly due to a stressed-out queen.


Do not water the substrate inside the outworld at all. Feed your ants into the outworld ONLY.

Don’t expose your ants to direct sunlight or any heat/light source (lamps/bulbs) trying to move them inside the nest quicker or you may harm your queen ant.

It is your responsibility to ensure you have undertaken enough research to be able to look after the insects and provide them with the correct conditions.

 

Happy "anting" :)

 

Any questions? Please ask :)

 

Thank you

A5 PLA LED Hybrid Ant Setup with Plaster Smart BT Meter Ant Farm Formicarium

£114.99Price
  • Please contact us if you have any problems with your order.

    Contact us within 14 days of delivery.

    Ship items back within: 21 days of delivery.

    Live insects/animals and items that are personalised or made to specific requirements such as Personalised Ant Nest, etc. are excluded from the Distance Selling Regulations and are non-returnable so unless they arrive damaged or defective, we don't accept returns.

    Conditions of return:

    Buyers are responsible for return shipping costs. If the item is not returned in its original condition, the buyer is responsible for any loss in value.

All Products Search: